What is the default IPv4 address you will typically use to access a fresh MikroTik device when connected directly via Ethernet?

• A. 192.168.0.1/24
• B. 10.0.0.1/24
• C. 192.168.88.1/24
• D. 192.168.1.1/24

Answer: (C)

When you connect a MikroTik device directly to your computer, you reach the device through its default management IP on the Ethernet interface. The device is shipped with 192.168.88.1 as that management address, with a /24 subnet. So, to access it, set your PC to the same subnet (for example 192.168.88.2/24) and open Winbox or WebFig to connect to 192.168.88.1. This default makes initial setup straightforward without needing to configure anything first.

Other common defaults like 192.168.0.1, 192.168.1.1, or 10.0.0.1 are typical for different devices or networks, but they aren’t MikroTik’s default for a fresh Ethernet connection. If you can’t reach 192.168.88.1, it might be because the IP was changed, the wrong interface is being used, or you need to reset the device to restore the default.